Comes with the 2 adapter pieces and the takeup spool.
This adapts 35mm film canisters to work as a 120 format spool, and allows shooting 35mm film in any 120 medium format film camera. The 35mm film is centered on the 120 spool. Using this adapter allows using films that are not available in 120 format, and the entire 35mm film is exposed, resulting in images out to the edges, sprocket holes and all, resulting in a unique effect.
Do not force adapters on. Make sure the splines are aligned and if tight, trim/sand or wiggle on carefully. The splines may need to be trimmed to fit Kalt bulk loading canisters and some others.
The hole for viewing the film number (usually a red window) on the camera must be taped over with black gaffer’s tape or some suitable opaque tape to avoid back side exposure of the film. You will need to wind blindly about 1-1/2 turns at the beginning and taper down to 1-1/4 turn at the end. Most medium format cameras have no rewind, so you will need to unload the film in a darkroom or changing bag and manually rewind the 35mm film back into its canister. When processing, specify “process only” and “do not cut” and cut the film yourself.
There are many resources for number of turns depending on your camera type they are quite easy to find with some googling.
35mm Film on 120 Spool by coconnor55
120 Takeup Spool for 35mm Film
Published on May 7, 2014 and October 30,2014
www.thingiverse.com/thing:323120
www.thingiverse.com/thing:522005